TF Style Flanges
Model TF flanges are created from exactly the same high-strength cast iron because the S flanges, but are intended to accommodate the international typical Taper Lock bushing for simple set up and removal
TF Variety flanges allow for mounting the bushing around the front (hub) side from the flange
TF flanges can be found in sizes 6 by 16 and might be applied with any type of sleeve as pictured on webpage SF-5
TR Type Flanges
TR flanges are equivalent for the TF design, but let for the Taper Lock Bushing to be mounted and eliminated from
the reverse or serration side with the flange
The restricted torque ratings in the Taper Lock Bushings make it possible for TR flanges to only be used with EPDM or Neoprene sleeves
Unique bushing sizes are employed, so they’ve distinct optimum bores than the TF flanges
Sizes 6 via 16 can be found
Taper-Lock Bushings
The business regular taper lock bushing can be a split style permitting a compression fit with the flange towards the shaft without the need of set screws
The uncomplicated design and style makes the set up and removal simple even though the 8° taper grips tight and delivers outstanding concentricity
A Decreased level of inventory is often attained due to the numerous other power transmission elements that use Taper Lock Bushings such as: sheaves, sprockets, and pulleys
will not offer you the Taper-Lock Bushings themselves as they are extensively accessible from other manufacturers