FMM Style Mill Couplings
The FMM Kind coupling consists of one particular standard flex hub, a single universal straight bored hub as common, two sleeves and one accessory kit. This coupling is supplied with exposed bolts as normal. Shrouded bolts can be found upon request as a result of size five.5.
Capabilities
For long daily life
Regular 20° strain angle
Heat handled bolts for greater strength
Corrosion resistant bolts and nuts for ease of upkeep
Offers parallel, angular misalignment and finish float
Flex Half coupling interchangeable with field standards
Lengthy Universal Hub supplied to client specs with straight or tapered bores
Ordering Information and facts
Application: Driver and Driven.
Sort and size of coupling, horizontal, vertical etc.
Power: Motor horspower or torque necessity.
Velocity: Motor RPM or Driven RPM.
Distance amongst shaft ends (BSE).
Shaft sizes.
Taper per foot and length of taper if tapered bore is required.
Specify counterbore dimensions if desired.
Submit a drawing if available.

FHDFS Type Floating Shaft Couplings
The FHDFS Type coupling includes two flex-rigid couplings and one particular floating shaft. The coupling is supplied using the rigid hubs outboard except if otherwise specified. The coupling includes exposed bolts only.
Attributes
Flex Hubs for long life
Conventional 20° stress angle
Heat taken care of bolts for higher strength
Corrosion resistant bolts and nuts for ease of maintenance
Accommodates parallel and angular misalignment
Elimination of center assembly enables forease of maintenance without the need of repositioning machinery
Rigid hubs outboard enables for bigger shaft diameters
Designed for high-torque low-speed applications that occur in mill operations
Ordering Information and facts
Application: Driver and Driven.
Style and size of coupling, horizontal, vertical and so on.
Electrical power: Motor horspower or torque requirement.
Velocity: Motor RPM or Driven RPM.
Distance in between shaft ends (BSE).
Connecting products shaft sizes.
Specify which hubs are to be employed on the equipment (Rigid or Flex).
Rigid hubs are going to be utilized around the tools unless of course otherwise specified.
Length of floating shaft may possibly influence max angular misalignment.