PM motors have high full-load efficiency plus they are lighter, but the flux-weakening region is no more than two times the high torque region. PM motors generally require higher currents to make them adaptable because of this application having a wide constant horse power region. As a result, the inverter must be larger, and cost and packaging become bigger issues. Surface-installed and axial field PM machines also have extreme iron losses at high speeds, and their part-load performance at high speeds is leaner. The axial field machines with arigap windings possess suprisingly low armature reactance and are not ideal for traction drives. They are best for applications having little or no constant horse power region of operation.

PM synchronous reluctance motors with weak permanent magnets that depend on high reluctance torque provide wider CHP range but exhibit bigger torque pulsations that are detrimental to the procedure of the drive system. Thus, inner PM motors seem to be the most suitable of all PM machines. In general, PM machines are better suited to multispeed gear boxes comparable to auto transmissions, while induction motors can be operated with an individual speed reducer.
A few of these motors are suitable for variable-quickness traction drive, and some have to be modified to suit certain requirements. For example, for a broad constant horsepower (CHP) region of operation, the induction engine is ideal, but it weighs more and includes a lower full-load efficiency than various other alternatives. The switched reluctance electric motor has a similar capability, but suffers some high torque pulsations and noise. Induction motors lend themselves to flux weakening more easily than long lasting magnet motors, however they are less electric motor base effective than PM motors for full-load procedure. For induction electric motor drives, the utmost voltage point can coincide with the bottom speed, giving the maximum torque per ampere. For inner PM motors,
The motor bases are a 2 in 1 system. It really is a electric motor support and with a built-in selftensioning system. Often keeps the ideal belt tension producing a constant transmission of the nominal torque. Leading to a protracted belt and pulley life and energy saving.
When using the motor bottom, problems like the compensation of lengthening because of age and belt slip are no longer a concern in your machine style – you can merely forget the periodical re-tensioning maintenance! electric motor bases can mount motors up to 550kW equal to 750PS.

Secure money, improve your productivity due to much less maintenance interrupts and increase your profit.
The motor (50) comes with an axial blower (170) with a blower guard (35) comprising two axial blower guard sections, where one of the guard sections comprises a consistently curved circumferential surface. Among the axial blower safeguard sections surrounds a blower wheel with a drive and various other axial blower safeguard section is usually imposed on a casing (52) of the motor in a partially overlapped manner. A blower connection box (39) is definitely fastened to the blower guard, in which a front surface area, a retainer for blower motor and a blower connection box base are integrally shaped and set at the safeguard.
The electric motor of the Y2 series are the renewal of the merchandise of the series electric motors. They have a number of improvements compared to the Y series in safety grade, locked-rotor torque and contour design etc. They appear to advanced word standards of the early 1990s.

The Y2 series electric motor are the three-phase asynchronous electric motors with fully-enclosed, self cooled, and squirrel cage type. The energy grade and the set up dimension are up to the IEC regular and the DIN42673 standard completely. The insulation quality is F. The external covering protection quality is IP54. The way of cooling is ICO141.
Y series motors are trusted in many locations, where there doesn’t exist combustible, explosive or corrosive gas, and with no unique requirements, such as machine equipment, pumps, fans, transportation machinery, mixer, agriculture machinery and food machines, etc.
The rated voltage of the Y2 series electric motors is 380V. The rated frequency is 50Hz. Just how of function is S1 continuous work system. The terminal package is at the very best of the electric motor. It could move at intervals of ninety degrees. It could issue wires from the any path of the front, the trunk, the left and the proper. The contour dimension and the terminal box at the top will vary from the Y series.
power can be used as the power supply, and a long lasting magnet DC motor can be used as the driving power source. After supplying power, the DC electric motor rotates, and the motor worm and the turbine perform deceleration, and a nut is definitely fixed on the inner tube. After the screw rod rotates, the nut advancements and retreats on the screw rod,then your inner tube advances and retreats.By switching the negative and positive poles of DC, the engine will rotate ahead or reverse, so that the internal tube is ahead or backward. By changing the pitch of the screw and the nut, the huge thrust and speed of the press rod could be changed to force the electrical sofa to realize complicated actions.so the engine and the worm should have high quality,small volume and huge torque,and in order to meet high bearing capacity,the electric motor and the worm ought to be reliable,nevertheless,our gear motor from ZHAOWEI fulfills these features.meanwhile,a variety of gear motor can be personalized according to customer needs, including R & D design, production, examining, assembly, etc.
– Discover the advantages of being active during the workday with the Electric Height-Adjustable Standing Desk in the home or in the office.
– Upgrade with a desk that encourages a wholesome life-style and by reducing the unhealthy sedentary behavior.
– With a simple press of the buttons, dual electrical motors easily and quietly change the height from at the least 28 in . to a maximum height of 46.8 inches.
– Solid steel structure throughout gives the desk stability and strength through repeated uses.
– Save up to 4 height configurations on the memory buttons and change to the perfect height during the day with the height controller. An LED screen.
Lets you know how high the desk is really as it rises – and descends.
– Assembly can be easy and can be achieved in a few minutes with the included tools. Utilize it as a house desk substitute, or as an instantaneous upgrade to office spaces for large and small businesses.
This small gear motor is made to be small size,low noise,easy installation.The mini 12v dc gear electric motor is widely used for vending machine,automatic microwave oven,ATM machine,financial institution equipment,BBQ oven and other house appliance.
1) Low noise.
2) Small body.
3) Powder metal gear inside.
4) Top quality zinc alloy gear package
5) Can be applied for various kinds of small automatic equipment.
Product characteristics
1.Match to the mini 60KTYZ/68KTYZ motor as a bracket or holder.
2.Anti-rust Paint Technique: U type and standard type electric motor bracket, adopting electroplating process, have good anti-rust effect.
3.Fixed motors in a company way, convenient to use.
4.Made of high quality mental material, sturdy and durable used.
1.Synchronous gear engine operates on AC 220V. Low noise and better quality. An excellent motor for
household, hand-made, school task, model and anything else you wish. Above parameters simply for your reference,we can provide personalized service with motor according to your requirements.

2.This product is a claw-pole long term magnet synchronous motor with built-in gear reduction mechanism that can control forward and reverse operation. It is also called gear decrease synchronous motor. This electric motor has characteristics of low power intake, large torque, low noise, light weight and simple to use.
1.Seiko bearings
Antirust and moistureproof abrasion resistance, high-speed operation of the machine continues to be smoothly and quiet

2.High-quality stator and rotor
High quality chilly rolled silicon steel sheet,high hardness ,strong power high efficiency and long service life,shaft with high frequency quenching

3.High quality lacquer surface
Pure top quality paint ,360 degree protection electric motor ,cast iron barrel, solid and durable.
4.Pure copper core
Pure copper core/machine winding, solid binding, winding using F-grade oxygen-free copper wire, high temperature resistance, extended life, not simple to damage, the normal enameled wire is not compared with it.
Other Types of Intelligent Motor

Model Out place Voltage Frequency QT of capacitance Current Speed weight
Kw Hp
YL90-750R-4P 0.75 1 220v 50HZ 2 5.1A 1400r/min 17kg
YL90-1100R-4P 1.1 1.5 220v 50HZ 2 7.1A 1400r/min 18kg
YL90-1500R-4P 1.5 2 220v 50HZ 2 9.44A 1400r/min 20kg
YL90-1800R-4P 1.8 2.5 220v 50HZ 2 11.3A 1400r/min 23kg

YL90-750R-2P 0.75 1 220v 50HZ 2 5.1A 2800r/min 16kg
YL90-1100R-2P 1.1 1.5 220v 50HZ 2 7.1A 2800r/min 17kg
YL90-1600R-2P 1.6 2 220v 50HZ 2 9.44A 2800r/min 29kg
YL90-1800R-2P 1.8 2.5 220v 50HZ 2 11.3A 2800r/min 21kg
YL90-2200R-2P 2.2 3 220v 50HZ 2 13.6A 2800r/min 22kg

YL100-2300R-2P 2.3 3 220v 50HZ 2 13.9A 2800r/min 26kg
YL100-2600R-2P 2.6 3.5 220v 50HZ 2 15.8A 2800r/min 27kg
YL100-3000R-2P 3 4 220v 50HZ 2 17.2A 2800r/min 28kg
YL100-3500R-2P 3.5 4.8 220v 50HZ 2 19.8A 2800r/min 31kg

YL100-2200R-4P 2.2 3 220v 50HZ 2 13.6A 1400r/min 31kg
YL100-3000R-4P 3 4 220v 50HZ 2 17.2A 1400r/min 33kg