DC MOTOR PUMP GROUP 1
Common Description
Consisting of a hefty duty DC motor as well as CB1S gear pump, this pump motor group is an suitable hydraulic electrical power unit for mobile hydraulic equipments, this kind of as car carriers, mobile aerial lifts, and backup systems.
DC MOTOR PUMP GROUP 2
General Description
This motor pump consists of 4.5″ DC motor, a CBSR gear pump with built-in relief valve and verify valve.
DC MOTOR PUMP GROUP three
Standard Description
This motor pump includes a 4.5″ DC motor as well as a CBSR gear pump which has a typical electrical power up/gravity down circuit having a relief valve, a examine valve and a solenoid release valve.
Unique Notes
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all the hydraulic parts concerned before mounting the power unit.
three. Viscosity with the hydraulic oil shoud be 15~68 cst, which should really also be clean and free of charge of impurities. N46 hydraulic oil is recommended.
four. The power unit should be mounted horizontally.
5. The relief valve pressure is preset about 25% greater than the working pressure.
6. Flow control valve for lowing pace adjustment is available unpon request.