ep

December 6, 2019

Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 motor. Ideal applications where an easy to match, high torque result is required. Great for worm motor student based projects including robots and buggies.
The machine has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. E.g. reducing to size. The engine is snap fitted into its cradle to activate the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor isn’t turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for small walking robots, lifting mechanisms, and various other applications where high torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draft to a few amps, making them ideal candidates for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, actually at suprisingly low voltages. We recommend that you utilize stall-detection sensors, or simply watch your robot, to ensure that it doesn’t stall for more than a few seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also fits on the smaller threaded end of the shaft, although it is not particularly intended to work with this kind of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors arranged new requirements for reliability, performance and economic climate with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly style offers easy integration right now and a future proof answer. The Ever-Power gear electric motor offers total flexibility in mounting choices includes shaft, base, encounter, and flange solutions. The electric motor terminal box could be mounted in alternative positions rotated in 90º steps around the electric motor frame providing for unparalleled integration possibilities.
Ever-Power gear motors adhere to UNITED STATES and International standards, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total solution for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose evidence,and can be used outside or in wet and dusty environments without the utilization of additional enclosures. Complete rated output is offered by the result shaft of the machine.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With integrated inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the remedy for applications requiring a corner turn, optional dual result, or an inability for the electric motor to be back again driven. The DC right angle gear motors are created for constant and intermittent duty procedure. Our right angle gear reducers were created with many mounting plate options, making them well suited for a number of DC engine based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are designed to generate high torque in a little package size. Worm Equipment Motors are excellent for applications that want a personal- locking or breaking feature because the output shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Items includes a DC Worm Equipment Motor solution for your application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Systems / Security Gates / Dental Seats / Ambulance Cots & Stretchers Quite a few DC Motors could be complimented with one of our Worm Gearheads. EP Items will continue to work with you to design and produce a Worm Gear Engine that will optimize the functionality of your specific application.
Built to your unique requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor uses a metal gear box for sturdiness and a high torque output. Because of the special mechanical structure of the worm drive the electric motor output shaft is definitely self locking and may not be rotated.
This part runs on the two wire connection and supports direction control as well as PWM speed control. Rated voltage is 12v and can accomplish 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear units from EP DRIVESYSTEMS especially show their power in applications where high equipment ratios are necessary. Our worm geared motors are as a result optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions enable simple and efficient cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular design give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each of these has its own unique requirements. The EP series worm equipment motors can be quickly and effectively adapted to meet your needs.
Worm gear systems impress with their high power density and small design. If required, we can also supply them with the impressive nsd tupH surface treatment.
In addition to the basic EP casing, you can expect an extensive line of bolt-on parts to customize the product including torque arms, shaft covers and output flanges. These can be very easily field set up, but we may also be pleased to assemble the average person components for you.
Find out more about the modular SI worm geared motors!
Find out more
Easy and Clean: The EP worm equipment unit SMI
SMI worm gear models feature a soft, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface area conversion makes this product ideally suited for severe and challenging industries like meals processing and pharmaceuticals.
Versatile input designs such as for example NEMA, IEC or direct motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units have got on all sides different fixing possibilities and enable an easy assembling for the client.
Various other drive configurationscan be created by use of built-on components (e.g. torque arm and output flanges). The housings are made in light weight construction out of aluminium die cast. Engine attachment is realised generally by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Engine – incorporating the next features: 1 to 6V voltage rating, 17100 rpm no load swiftness, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 engine (included), most ideal for applications where an easy to match, high torque output is required, nylon housing and equipment, requires light essential oil or silicon grease lubrication, perfect for student based tasks including robots and buggies.
Most ideal for applications where an easy to match, high torque result is required
Perfect for student based tasks including robots and buggies
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared motor with self-lock, that’s, in the case of motor without electrical, the output axis is certainly fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole engine output shaft relatively-short than general gear engine, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the window, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s electric motor is essential to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option compared to the spur gear motor. How come worm gear so particular? Check this wiki out: Worm Drive.
“Unlike with ordinary gear trains, the direction of transmission (insight shaft vs output shaft) isn’t reversible when using large reduction ratios, because of the better friction involved between the worm and worm-wheel, when usually an individual start (one spiral) worm can be used. This is often a advantage when it’s desired to remove any likelihood of the result driving the input.”
In other terms, it is challenging to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g