The EP Greenhouse geared motor is a concise and lightweight reduction geared motor with a limit switch system that’s suitable for assembly of a locally available electric motor. The reducer is utilized in manually-managed or climate-managed ventilation and display systems in greenhouses. The quick and easy-to-install EP reducer is usually rainproof and windproof. The gear motor has a high protection course (IP65) and can be used in an ambient temperature of 0-60 °C.

The low-noise gear reducer for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel tranny means that the drive shaft is usually locked when the reduction reducer is not running. The completely sealed reduction gear driver has an growth chamber with a diaphragm to keep carefully the gear oil at a low pressure under all conditions, even at high temps. Thanks to the usage of an growth chamber, the geared motor can be installed in any placement. There are no restrictions, since there is no need for a bleed plug. The sealed reduction gear driver keeps the gear essential oil of the gear reducer in optimum condition because of its entire operating lifetime. The reducer is suitable for discontinuous use, working course s3-30%, with a maximum activation time of 25 minutes.

The Gear box reduction gearbox comes with an FT85 motor assembly flange, on to which the right IEC standard motor can easily be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed in an included chamber and is enclosed by an impact-resistant plastic cover. The limit switch system is accessible and simple to adjust. The limit change system’s optimum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gearbox comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The reducer for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of app of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperature ranges of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 moments.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).